The latest version of mechanical eyelet buttonhole machine combines proven sewing functions of earlier models with new improved mechanisms. The result is an optimization of sewing quality, sewing speed, reliability, ergonomics and noise level. The S-105 mechanical eyelet buttonhole machine is user friendly with very simple adjustments of buttonhole type, buttonhole cutting, eye shape etc. The S-105 is the only mechanical eyelet buttonhole machine offered with submerged sewing head that allows the operator to handle the garment more ergonomically. This mechanical eyelet buttonhole machine is sewing open and flybar buttonholes with or without the eye at the speed of 1800 spm. The buttonhole length is adjustable between 12-38 mm depending on the garment manufacturers’ requirements
With speeds up to 1,800 spm, this is one of the AMF Reece's fastest and most productive mechanical eyelet buttonhole machine. The daily productivity, based on an 8-hour shift, is about 3,300 buttonholes.
The Roller Activated Stop Motion, also installed on the S-101machine, dependably positions the brake pad for a full revolution of braking every time. By absorbing much of the inertia prior to the stop, the life of the machine is prolonged and quality problems, such as double stops, are virtually eliminated.
The machine spends more time sewing since components like the fly over and the eccentric cam are no longer needed and fewer adjustments are required.
The S-105 is equipped with a full drip oil wick lubrication system. By using wicks to carry oil to the critical parts of the machine, oiling is easier and less time consuming
The advantage of this system is that it eliminates periodic oiling downtime, reduces maintenance expense and prolongs the machine life.
An oil level indicator shows the operator or mechanic when the machine is low on oil, preventing the machine from the severe damage that can be caused by running a machine without the required minimum oil.
All buttonhole adjustments such as buttonhole type, cutting selection (cut before, cut after, no cut), eye shape (eye, no eye) are easily adjusted by simple usage of levers and knobs.
By using an aluminum bedplate instead of a cast-iron bedplate, the weight is reduced by over 1/3. The lighter bedplate reduces stress and wear, thus prolonging the life of the machine.
The S-105 machine is supplied with a submerged sewing head that allows the operator to handle the garments more ergonomically and helps to reduce the noise level.