SIZE: 11.5 * 8 * 6.5 cm / 4.53 * 3.15 * 2.56 inch
WEIGHT: 804 g / 1.77 lb
Supporting the airbrush:
BT136-0.4mm beauty special airbrush
WEIGHT :62.6 g / 0.14 lb
Standard Nozzle Dia.: 0.4 mm
Cup Capacity: 2cc
Single-action Trigger Air-paint Control
Easy fluid refills and easy cleaning.
BT16 Mini Air Compressor:
Voltage : 12 volt DC
Adapter: International convertor,100v -240v included
Plugs : US
Sound : Quiet, vibration free
Holder : Airbrush holder, soft plastic
Port : Easy push-over & pull-off air hose connection
Air hose: 1.5m
Time : Designed for extended running and use.
Air flow: 7.5L/min
Max pressure: 25PSI
Working style: Three adjustable pressure.Internal hot protection device, the compressor will auto cut off the power when its about to over heat, and reset after the motor cool down.
Suitable for 0.2~0.5mm airbrush
1 X Air Brush
1 X Air Brush Holder
1 X Air Compressor
1 X Air Hose
1 X AC Transformer
1 X Instruction for Compressor
1 X Storage Case for Air Compressor
How to spray:
1.Fill fluid in the cup after thinning appropriately.
2.Hold the airbrush lightly in you hand.
3.By pressing the main lever, a stream of air emerges. Then draw it backward gradually for color atomization.
4.For fine line spray, remove the needle cover and hold the airbrush near a work surface.
1.Empty the fluid cup and wash with water or solvent by a brush.
2.Refill cup with water or solvent, then block the needle cover with a finger and spray. The air flows backward into nozzle to clean the paints remained the airbrush.