Size：143 * 65 mm / 5.63 * 2.56 inch
Weight：357g / 0.79 lb
Nozzle Dia：Airbrush on 0.3, parts 0.2 and 0.5
Standard Nozzle Dia.: 0.3mm
Cup Capacity: 7cc & 22cc
Working Pressure:15-50 psi
Double-action Trigger Air-paint Control
1 x Airbrush
1 x Nozzle Wrench
1 x Eye Dropper
1 x Instruction
1 x 0.2mm nozzle
1 x 0.5mm nozzle
1 x 0.5mm nezzle cap
1 x 0.2mm jet needle
1 x 0.5mm jet needle
1 x 7CC Cup Capacity
1 x 22CC Cup Capacity
1 x Air hose
1.Please debug to the best state after receiving airbrush, and then use a clean water test, atomization is normal, you can use.
2.Please use it stability, if dropped on the ground, may affect the use effect, or damage.
3.After use, please clean the airbrush, avoid clogging, effect the next time you normally use.
4.To prolong your airbrush gun's life span, it will be better to clean with water thinner like Alcohol after water paint. oil paint should be cleaned with oil thinner like ethyl acetate.
How to spray:
1.Fill fluid in the cup after thinning appropriately.
2.Hold the airbrush lightly in you hand.
3.By pressing the main lever, a stream of air emerges. Then draw it backward gradually for color atomization.
4.The spray pattern is in accordance with the distance between a work surface and a air brush.
5.For fine line spray, remove the needle cover and hold the airbrush near a work surface.
1.Empty the fluid cup and wash with water or solvent by a brush.
2.Refill cup with water or solvent, then block the needle cover with a finger and spray. The air flows backward into nozzle to clean the paints remained the airbrush.