800 739 464
0 Items View Cart

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

LCA(TM) Light Cure Acrylic - Brown Tones DIY Surface Repair Kit for Granite, Marble and Acrylic

Quick Overview

  • High Quality Repair In Minutes

  • Recommended For Damages No Larger Than A Penny

  • Non-Toxic and Approved for Food Prep Areas

  • Works Great on Granite, Marble, Acrylic, Porcelain, Tile and Other Natural Surfaces

  • Made in the USA

Availability: In stock


1-3 Days


Why buy from a foreign competitor when you can buy the original from the US? Genuine CeramiCure(R) Surface Repair Products by HIMG(R) INC. The ORIGINAL! CeramiCure(R) Light Cure Acrylic (LCA(TM)) is a complete repair solution for making invisible repairs to chips, nicks and scratches on ceramic and porcelain flooring. LCA(TM) is nano-acrylic based and non-toxic. It will not yellow or change color like epoxy. Check out other CeramiCure(R) products and more information at Kit Contents: The BROWN LCA(TM) Kit include 3 different 1g syringes of brown LCA(TM) repair material - BEIGE, SEPIA BROWN, CLAY BROWN. These can be mixed together to achieve the perfect match for the damaged surface. The fourth syringe is a polishing paste. There is sufficient repair material to complete 10 small repairs. The kit also has micro applicator tips, 2 plastic applicator tools, a polishing cloth, sandpaper, a mini LED light and curing strips. The Repair Process is easy: 1. Clean the defect and surrounding area so it is free from dust and dirt. 2. Place the application tip on the syringe and select the CeramiCure(R) LCA(TM)color that match best with the surface. 3. Apply the CeramiCure(R) LCA(TM) to the damaged area and use the plastic applicator to mix the colors. 4. Mix the colors in small amounts until it closely matches the original floor color. Be sure to clean the applicator between colors. 5. Using the cloth, remove all the excess resin from the surrounding areas, leaving the material only in the repair. Place the curing strip on the repair patch and smooth out the LCA(TM) material through the curing strip using the plastic applicator tool until the LCA(TM) material is level with the surface. 6. Use the LED to cure approximately 2 minutes for small repairs or 3-4 minutes for large repairs. 7. Check that the LCA(TM) material is fully cured and dry, then remove any excess resin by sanding. Then increase shine with the polish paste.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register